Yamaha aw16g Manuale Utente
141
Song management
13
Optimizing a song
“Optimize” is an operation that deletes the undo/redo
audio data maintained within the song. When you have
finished recording and editing a song, you can execute
the Optimize operation on that song to increase the
amount of free space on the hard disk.
audio data maintained within the song. When you have
finished recording and editing a song, you can execute
the Optimize operation on that song to increase the
amount of free space on the hard disk.
Note
Note
The deleted undo/redo audio data will be lost forever.
Use this operation with caution.
Use this operation with caution.
1
In the Work Navigate section, repeatedly
press the [SONG] key or hold down the
[SONG] key and use the CURSOR [
press the [SONG] key or hold down the
[SONG] key and use the CURSOR [
]/[
]
keys to access the LIST page of the SONG
screen.
screen.
2
Turn the [DATA/JOG] dial to select the song
that you want to optimize.
that you want to optimize.
The line enclosed by the dotted frame indicates the
selected song.
selected song.
3
Move the cursor to the OPTIMZ button, and
press the [ENTER] key.
press the [ENTER] key.
A popup window will ask you to confirm the opti-
mize operation.
mize operation.
Tip!
Tip!
You may select the current song to be optimized. In this
case, a popup window will ask you whether you want to
save the current song. Move the cursor to the YES button
(if you want to save) or the NO button (if you don’t want
to save), and press the [ENTER] key.
case, a popup window will ask you whether you want to
save the current song. Move the cursor to the YES button
(if you want to save) or the NO button (if you don’t want
to save), and press the [ENTER] key.
4
To execute the optimize operation, move the
cursor to the OK button and press the
[ENTER] key.
cursor to the OK button and press the
[ENTER] key.
The undo/redo audio data of the song you selected
in step 2 will be deleted, and you will return to step
1. If you decide not to execute the optimize opera-
tion, move the cursor to the CANCEL button and
press the [ENTER] key.
in step 2 will be deleted, and you will return to step
1. If you decide not to execute the optimize opera-
tion, move the cursor to the CANCEL button and
press the [ENTER] key.