Yamaha cd-r1000 Manuale Utente
ii
CDR1000—Owner’s Manual
•
Do not block the CDR1000 ventilation slots. The CDR1000 has ventilation slots at the
side and a cooling fan at the rear to keep the internal components cool. Blocking the
ventilation slots or obstructing the fan’s airflow is a potential fire hazard.
side and a cooling fan at the rear to keep the internal components cool. Blocking the
ventilation slots or obstructing the fan’s airflow is a potential fire hazard.
Cautions
•
Allow enough free space around the unit for normal ventilation. This should be: 10 cm
at the sides, 40 cm behind, and 30 cm above. These distances should also be adopted
when rack-mounting the CDR1000. For normal ventilation during use, remove the
rear of the rack or open a ventilation hole. If the airflow is not adequate, the CDR1000
will heat up inside and may cause a fire.
at the sides, 40 cm behind, and 30 cm above. These distances should also be adopted
when rack-mounting the CDR1000. For normal ventilation during use, remove the
rear of the rack or open a ventilation hole. If the airflow is not adequate, the CDR1000
will heat up inside and may cause a fire.
•
Do not look at the laser beam. You may damage your vision.
•
Use the CDR1000 in an environment where the temperature is between 5˚C and 35˚C
(41˚F and 95˚F).
(41˚F and 95˚F).
•
Turn off audio devices when connecting them to the CDR1000, and use only the cables
specified in the relevant owner’s manuals.
specified in the relevant owner’s manuals.
•
If you plan not to use the CDR1000 for a long period of time, remove the power cord
from the AC outlet. Leaving the CDR1000 connected is a potential fire hazard.
from the AC outlet. Leaving the CDR1000 connected is a potential fire hazard.
•
Do not use benzene, thinner, cleaning detergent, or a chemical cloth to clean the
CDR1000. Use only a soft, dry cloth.
CDR1000. Use only a soft, dry cloth.
•
Do not attempt to move the CDR1000 during recording. Doing so may interrupt the
recording process and render the disc unusable.
recording process and render the disc unusable.
•
If the CDR1000 is stored in a cold place (e.g., overnight in a car), and then moved to a
warmer environment, or the temperature rises sharply, condensation may form inside
the CDR1000, which may affect performance. In such cases, the CDR1000 should be
allowed to acclimatize for about one hour before use.
warmer environment, or the temperature rises sharply, condensation may form inside
the CDR1000, which may affect performance. In such cases, the CDR1000 should be
allowed to acclimatize for about one hour before use.
Handling Discs
•
Use only discs of the type specified in this
Owner’s Manual
.
•
Store discs in a place free from extreme temperatures, humidity, dust, and dirt.
•
Always store discs in their cases.
•
When handling discs, be careful not to touch the surface. Hold discs by the edge. Fin-
gerprints, smudges, scratches, or dirt can affect recording and playback.
gerprints, smudges, scratches, or dirt can affect recording and playback.
•
Be careful not to scratch the labeled side of the disc. Even scratches on this side of the
disc can affect recording and playback.
disc can affect recording and playback.
•
Fingerprints and dust should be removed by wiping gently from the center of the disc
towards the disc edge, using a soft, dry cloth. Never wipe in a circular motion and never
rub a disc hard with a dry cloth.
towards the disc edge, using a soft, dry cloth. Never wipe in a circular motion and never
rub a disc hard with a dry cloth.
•
For stubborn stains and dirt, use a cleaning kit designed specifically for use with CDs.
Do not use benzene, thinner, cleaning detergent, or a chemical cloth.
Do not use benzene, thinner, cleaning detergent, or a chemical cloth.
•
For disc marking, use only pens specifically designed for writing on CDs and write only
on the specified area. Do not attach a label to a disc.
on the specified area. Do not attach a label to a disc.
•
If a disc is stored in a cold place (e.g., overnight in a car), and then moved to a warmer
environment, or the temperature rises sharply, condensation may form on the disc sur-
face, which may affect performance. In such cases, the disc should be allowed to accli-
matize for about one hour before use.
environment, or the temperature rises sharply, condensation may form on the disc sur-
face, which may affect performance. In such cases, the disc should be allowed to accli-
matize for about one hour before use.
•
Do not under any circumstances attempt to use discs that are cracked or warped. Doing
so may seriously damage the CDR1000.
so may seriously damage the CDR1000.