Yamaha MCX-2000 Manuale Utente

MCX-2000 Setup Guide

4

• To assure the finest performance, please read this manual carefully. 

Keep it in a safe place for future reference.

• Install this unit in a well ventilated, cool, dry, clean place — away from 

direct sunlight, heat sources, vibration, dust, moisture, and/or cold. 
Avoid ventilation space of at least 30 cm on the top, 20 cm on the left 
and right, and 10 cm on the back of this unit.

• Locate this unit away from other electrical appliances, motors, or 

transformers to avoid humming sounds.

• Do not expose this unit to sudden temperature changes from cold to 

hot, and do not locate this unit in a environment with high humidity 
(i.e. a room with a humidifier) to prevent condensation inside this unit, 
which may cause an electrical shock, fire, damage to this unit, and/or 
personal injury.

• Avoid installing this unit where foreign object may fall onto this unit 

and/or this unit may be exposed to liquid dripping or splashing. On the 
top of this unit, do NOT place:

• Other components, as they may cause damage and/or discoloration on 

the surface of this unit.

• Burning objects (i.e. candles), as they may cause fire, damage to this 

unit, and/or personal injury.

• Containers with liquid in them, as they may fall and liquid may 

electrical shock to the user and/or damage to this unit. 

• Do not cover the rear panel of this unit with a newspaper, tablecloth, 

curtain, etc. in order not to obstruct heat radiation. If the temperature 
inside this unit rises, it may cause fire, damage to this unit, and/or 
personal injury.

• Do not plug in this unit to a wall outlet until all connections are 

complete.

• Do not operate this unit upside-down. It may overheat, possibly causing 

damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cable from the wall outlet, grasp the 

plug; do not pull the cord.

• Do not clean this unit with chemical solvents; this might damage the 

finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used. Using this unit with a 

higher voltage than specified is dangerous and may cause fire, damage 
to this unit, and/or personal injury. YAMAHA will not be held 
responsible for any damage resulting from use of this unit with a 
voltage other than specified.

• To prevent damage by lightning, keep the power cord and outdoor 

antennas disconnected from a wall outlet or the unit during a lightning 
storm.

• Do not attempt to modify or fix this unit. Contact qualified YAMAHA 

service personnel when any service is needed. The cabinet should never 
be opened for any reasons.

• When not planning to use this unit for long periods of time (i.e. 

vacation), disconnect the AC power plug from the wall outlet.

• Be sure to read the “TROUBLESHOOTING” section on common 

operating errors before concluding that this unit is faulty.

• Before moving this unit, first check that there is no disc in the disc tray. 

Finally, press STANDBY/ON to turn off this unit, and disconnect the 
AC power plug from the wall outlet.

• Install this unit near the AC outlet and where the AC power plug can be 

reached easily.

If the socket outlets in the home are not suitable for the plug supplied 
with this appliance, it should be cut off and an appropriate 3 pin plug 
fitted. For details, refer to the instructions described above.

Note: The plug severed from the mains lead must be destroyed, as a plug 
with bared flexible cord is hazardous if engaged in a live socket outlet.

This unit is not disconnected from the AC power source as long as it is 
connected to the wall outlet, even if this unit itself is turned off. In this 
state, this unit is designed to consume a very small quantity of power.

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO 
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Laser component in this product is capable of emitting radiation 
exceeding the limit for Class 1.

Please record the serial number of this unit in the space below.

The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future reference.

The wires in this mains lead are coloures in accordance with the 
following code:

GREEN-and-YELLOW: Earth
BLUE: Neutral
BROWN: Live

As the colours of the wires in the mains lead of this apparatus may 
not correspond with the coloured markings identifying the terminals 
in your plug proceed as follows: The wire which is coloured GREEN-
and-YELLOW must be connected to the terminal in the plug which is 
marked by the letter E or by the safety earth symbol 

 or coloured 

GREEN or GREEN-and -YELLOW. The wire which is coloured 
BLUE must be connected to the terminal which is marked with the 
letter N or coloured BLACK. The wire which is coloured BROWN 
must be connected to the terminal which is marked with the letter L 
or coloured RED.

To prevent electric shock, match wide blade of plug to wide slot and 
fully insert.
This Class B digital apparatus complies with Canadian ICES-003.

Do not remove the connector of built-in antenna from the MCX-2000.