Yamaha mt-1x Manuale Utente

This unit is designed to be used only with Chrome-

position tape, and will not work properly with Ferri-
chrome tape formulations. CrO tape (Bias: HIGH; EQ:
70µs) should be used. Also, the use of C-120 tapes
is not recommended because they exhibit poorer per-

formance, and can be the cause of equipment failure.

In order to get proper sound reproduction, set the dbx

switch ON when playing back tapes recorded with
dbx on, and keep it OFF when playing back tapes
recorded without dbx.

*dbx and the dbx mark are trademarks of dbx in-

corporated.

*The dbx system has been manufactured under

license of dbx Incorporated.

• USING THE AC ADAPTOR

Please use the AC adaptor supplied with this unit.
Other AC adaptors may vary in plug dimensions,
polarity, or output voltage, and their use with this unit
could cause damage.

• PRECAUTION AGAINST LIGHTNING

In the event of lightning or electrical storms, unplug

the AC adaptor as soon as possible to avoid poten-
tial damage.

• DO NOT OPEN THE CABINET

To avoid electrical shock or damage to the unit, do
not open the cabinet and tamper with the parts or
circuits inside.

• CONNECTING OTHER EQUIPMENT

Make sure the power switch is OFF and the input

fader is all the way down when connecting other
equipment.

• M0VING THE UNIT

To prevent shorts or breakage, make sure all connec-
tion cords have been removed from the unit before
moving it.

• CLEANING THE CABINET

Do not clean the unit with benzene or other power-
ful solvents, and avoid the use of aerosol insecticides
near the unit. Clean the unit only with a soft, dry

• CAUTIONS FOR THE AC ADAPTOR

Do not plug or unplug the AC adaptor with wet hands

–- you could receive a very dangerous shock.

To avoid shorts or cord breakage, do not pull the plug
out of the AC outlet by pulling on the cord. Be sure
to grasp the plug itself and pull it out. When leaving
home for an extended period of time, or when the unit
will not be used for a long time, unplug the AC

adaptor.

cloth.

NOTE: The AC adaptor has been designed for use

with 120V or 220-240V AC, and must not
be used in areas with different voltage. 

This equipment generates and uses radio frequen-

Reorient the receiving antenna.

cy energy and if not installed and used properly, that

Relocate the computer with respect to the receiver. 

is, in strict accordance with the manufacturer’s in-

Move the computer away from the receiver.

structions, may cause interference to radio and

Plug the computer into a different outlet so that

television reception. It has been type tested and

computer and receiver are on different branch cir-

found to comply with the limits for a Class B com-

cuits.

puting device in accordance with the specifications

If necessary, the user should consult the dealer

in Subpart J of Part 15 of FCC Rules, which are

or an experienced radio/television technician for ad-

designed to provide reasonable protection against

ditional suggestions. The user may find the follow-

such interference in a residential installation. How-

ing booklet prepared by the Federal Communications

ever, there is no guarantee that interference will not

Commission helpful:

occur in a particular installation. If this equipment

“How to identify. and Resolve Radio-TV inter-

does cause interference to radio or television recep-

ference problems”.

tion, which can be determined by turning the equip-

This booklet is available from the U.S. Government

ment off and on, the user is encouraged to try to

Printing Office, Washington, DC 20402, Stock No.

correct the interference by one or more of the follow-

004-000-00345-4.

ing measures: