Yamaha RX-N600 Manuale Utente

8

Switches between automatic tuning (the AUTO indicator 
is turned on) and manual tuning (the AUTO indicator is 
turned off) (see page 46).

9

Turns on Zone 2 or sets it to the standby mode 
(see page 99).

This button is operational only when MASTER ON/OFF is 
pressed inward to the ON position.

0

Switches the zone you want to control between the main 
zone and Zone 2 (see page 99).

y

When Zone 2 is selected, the ZONE2 indicator flashes in the front 
panel display for approximately 5 seconds. While the indicator is 
flashing, perform the desired operation.

A

Controls the output level of all audio channels.

y

This does not affect the AUDIO OUT (REC) level.

B

Outputs audio signals for private listening with 
headphones (see page 34). 

• When you connect headphones, no signals are output at the 

SUBWOOFER OUTPUT jack or the speaker terminals.

• All Dolby Digital and DTS audio signals are mixed down to the 

left and right headphone channels.

C

Turns on or off the set of front speakers connected to the 
FRONT A and/or B terminals on the rear panel each time 
the corresponding button is pressed.

D

• Switches the function of PRESET/TUNING/CH 

l / h between selecting preset station numbers and 
selecting the tuning frequency.

• Edits the assignments of preset stations (see page 51).

E

Turns the sound field programs off or on. When the 
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their 
respective speakers without effect processing (see 
page 39).

F

Switches the reception band between FM and AM when 
“TUNER” is selected as the input source (see page 46).

G

Selects sound field programs or adjusts the bass/treble 
balance in conjunction with TONE CONTROL (see 
page 33).

H

Adjusts the bass/treble balance of the front left and right 
speakers in conjunction with the PROGRAM selector 
(see page 33).

I

Selects either digital or analog input signals exclusively or 
sets this unit to automatically detect the type of input 
signals and select the corresponding input signals when 
one component is connected via both digital and analog 
connections (see page 35).

J

Selects the desired input source.

K

Selects the component connected to the MULTI CH 
INPUT jacks as the input source (see page 38).

The input source connected to the MULTI CH INPUT jacks takes 
priority over the source selected with the INPUT selector on the 
front panel (or the input selector buttons on the remote control).

L

Input audio and video signals from a portable external 
source such as a game console, a video camera or a 
portable audio player (see page 24).

y

To reproduce the source signals input at these jacks, select 
“V-AUX” as the input source.

The audio signals input at the DOCK terminal on the rear panel 
take priority over the ones input at the VIDEO AUX jacks.

M

Use to connect a USB memory device or a USB portable 
audio player (see page 107).