Yamaha RX-V730 Manuale Utente
57
English
INTR
ODUCTION
PREP
ARA
TION
B
ASIC OPERA-
TION
AD
V
ANCED
OPERA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
SOUND FIELD PROGRAM PARAMETER EDITING
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
■ S. DELAY (Surround delay)
Function:
This parameter adjusts the delay between the direct sound and the surround sound. (Control range
varies depending on programs.)
varies depending on programs.)
Control range: varies depending on the signal format.
■ S. INIT. DLY (Surround initial delay)
Function:
This parameter adjusts the delay between the direct sound and the first reflection on the surround side
of the sound field. You can only adjust this parameter when at least two front channels and two rear
channels are used.
of the sound field. You can only adjust this parameter when at least two front channels and two rear
channels are used.
Control range: 1 to 49 msec
■ S. ROOM SIZE (Surround room size)
Function:
This parameter adjusts the apparent size of the surround sound field.
Control range: 0.1 to 2.0
■ S. LIVENESS (Surround liveness)
Function:
This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
Control range: 0 to 10
■ RC. INIT. DLY (Rear center initial delay)
Function:
This parameter adjusts the delay between the direct sound and the first reflection in the rear center
sound field.
sound field.
Control range: 1 to 49 msec
■ RC. ROOM SIZE (Rear center room size)
Function:
This parameter adjusts the apparent size of the rear center sound field.
Control range: 0.1 to 2.0
■ RC. LIVENESS (Rear center liveness)
Function:
This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.
Control range: 0 to 10
10
0
Large
reflected sound
reflected sound
Small reflected
sound
sound
Sound source
Live
Time
Time
Time
Dead
Sound source
Le
v
el
Le
v
el
Le
v
el
■ LIVENESS
Function:
This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the
early reflections decay.
early reflections decay.
Description:
The early reflections of a sound source decay much faster in a room with acoustically absorbent wall
surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces
is referred to as “dead”, while a room with highly reflective surfaces is referred to as “live”. The
LIVENESS parameter lets you adjust the early reflection decay rate, and thus the “liveness” of the
room.
surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces
is referred to as “dead”, while a room with highly reflective surfaces is referred to as “live”. The
LIVENESS parameter lets you adjust the early reflection decay rate, and thus the “liveness” of the
room.
Control range: 0 to 10
0110V730_54-59_EN(U)
12/27/01, 2:18 PM
57