Envision Peripherals l37w698 Manuale Utente
11
INSTALLATION
Connecting RF antenna and Cable TV
Make sure the power is OFF before installing your LCD TV.
1) AIR
TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV
channels into memory with AUTO SCAN function when using an antenna TV system. This air
input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV
system (ATSC) can be found by the scanning of “AIR” in the AUTO SCAN function. See page
15.
input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV
system (ATSC) can be found by the scanning of “AIR” in the AUTO SCAN function. See page
15.
2) Cable
TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV
channels into memory with AUTO SCAN function when using a cable TV system. The cable
input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)
and Digital cable system (clear QAM) can be found by the scanning of “Cable” in the AUTO
SCAN function. See page 15.
input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)
and Digital cable system (clear QAM) can be found by the scanning of “Cable” in the AUTO
SCAN function. See page 15.
Note: Users can select either Air or Cable TV cable to be connected to the TV/DTV IN jack. To
watch both of them, use an adapter to connect both Air and Cable cables to the jack.
watch both of them, use an adapter to connect both Air and Cable cables to the jack.
Connecting to DVD / Set Top Box
Connect Video/Audio cables from compatible devices into the back panel of LCD TV.
Connect Video/Audio cables from compatible devices into the back panel of LCD TV.
1) With
AV
cable:
RF Cable, CATV/ Digital cable
or Adapter (not supplied)
or Adapter (not supplied)
VCD or DVD Player
RCA A/V Cable