Extreme networks Summit1 Manuale Utente

14-2

S

UMMIT

 S

WITCH

 I

NSTALLATION

 

AND

 U

SER

 G

UIDE

S

OFTWARE

 U

PGRADE

 

AND

 B

OOT

 O

PTIONS

Download the new image to the Summit using the command

download image [xmodem | <ipaddress> <filename>] {primary | 

secondary}

where the following is true:

xmodem

 — Indicates that you will be using XMODEM over the serial port.

ipaddress

 — Is the IP address of the TFTP server.

filename

 — Is the filename of the new image.

primary

 — Indicates the primary image.

secondary

 — Indicates the secondary image.

The Summit can store up to two images: a primary and a secondary. When you 
download a new image, you must select into which image space (primary or secondary) 
you want the new image to be placed.

You can select which image the switch will load on the next reboot by using the 
following command:

use image {primary | secondary}

If you do not specify which image to use, the switch automatically loads the primary 
image.

To reboot the switch, use the following command:

reboot {<date> <time> | cancel}

where 

date 

is the date and 

time

 is the time (using a 24-hour clock format) when the 

switch will be rebooted. The values use the following format:

mm/dd/yyyy hh:mm:ss

If you do not specify a reboot time, the reboot happens immediately following the 
command, and any previously scheduled reboots are cancelled. To cancel a previously 
scheduled reboot, use the 

cancel

 option.

Summit.bk : 14BOOT.FM  Page 2  Thursday, June 18, 1998  9:27 AM