Echo shc-1700 - type 1, shc-1700 - type 1e, shc-2100 - type 1, shc-2100 - type 1e, shc-2400 - type 1, shc-2400 - type 1e, hca-2400 - type 1e Manuale Utente

EDGE

LIPPER

PERATOR

ANUAL

EQUIPMENT

Before operation a complete check of the unit must be performed;
- Check unit for loose/missing nuts, bolts and screws. Tighten

and/or replace as needed.

- Inspect fuel lines, tank and area around carburetor for fuel leaks. DO

NOT operate unit if leaks are found.

- Inspect hand guard for damage. Replace if damaged or missing.

- Check that the blade assembly is firmly attached and in safe operating

condition. Dull, loose or damaged blades should not be used.

- Check that loop (front) handle and shoulder strap/ or shoulder/

waist harness are adjusted for safe, comfortable operation. See
Assembly for proper adjustment.

- Tighten the blade angle adjustment lever before operating the

HCA-2400.

FUEL

WARNING DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing
or handling or serious personal injury may result.

- Use an approved fuel container.
- DO NOT smoke near fuel.
- DO NOT allow flames or sparks near fuel.
- Fuel tanks/cans may be under pressure. Always loosen

fuel caps slowly allowing pressure to equalize.

- NEVER refuel a unit when the engine is HOT!
- NEVER refuel a unit with the engine running.
- DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks

outdoors over bare ground.

After Refueling;

- Wipe any spilled fuel from the unit.
- Move at least 10 ft. (3M) from refueling location before starting.

After Use;

- DO NOT store a unit with fuel in its tank. Leaks can occur. Return

unused fuel to an approved fuel storage container.

10' MINIMUM