Echo SRM-265 Manuale Utente

The attachment will operate immediately when the engine starts 

and could result in loss of control and possible serious injury. Keep 

movable parts of the attachment off the ground and away from 

objects that could become entangled or thrown.

1.  Stop Switch 

Move stop switch button (A) forward away from the STOP posi-

tion.

2.  Choke
 

Move choke lever (B) to Cold Start Position  (

).

3.  Purge Bulb

 

Pump purge bulb (C) until fuel is visible and flows freely in the 

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

4.  Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear 

of all obstacles. Firmly grasp right hand grip and throttle trigger 

lockout with left hand and fully depress throttle trigger to wide 

open position. Rapidly pull recoil starter handle/rope (D) until 

engine fires (or maximum five [5] pulls).

5.  Choke

 

After engine fires (or 5 pulls), move choke lever back to Run           
(

) position.  Hold throttle trigger and throttle trigger lockout 

fully depressed, and pull recoil starter starter handle/rope until 

engine starts and runs. Release throttle trigger, and allow unit to 

warm up at idle for several minutes.

If engine does not start with choke in “Run” position after 5 pulls, 

repeat instructions 2 - 5.

6.  Throttle Trigger

 

After engine warm-up, gradually depress throttle trigger to increase 

engine RPM to operating speed.