SATO cx 400 Manuale Utente

CX400 User Guide

Page 24

PN 9001107 Rev. A

lower right corner will take you to the Select Printer window where 

you select the printer model that will be used to print the label. Select-

ing “Printer Setup” opens a Printer Driver where the operating param-

eters of the printer can be configured.

The CX400 Windows Drivers lets you print labels using virtually any 

Windows application program. The driver can be installed using the 

Label Gallery Free START.EXE setup wizard or can be loaded like 

any other Windows printer driver using Add Printer from the Win-

dows Control Panel. The driver is located in the Drivers directory on 

the CD-ROM. After the driver is installed, you can send data to the 

CX400 just like any other printer on your system: simply specify the 

CX400 model in the Print dialog box of your Windows application.. 

The CX400 comes from the factory set up to operate with SATO 

media supplies that are shipped with the printer. These supplies have 

been carefully selected to give optimum results with your printer. 

Contact SATO sales for ordering information.Other may or may not 

give acceptable results. It is also probable that you will have to cali-

brate the sensors and heating settings before acceptable results are 

obtained. Calibration is accomplished by using the Windows driver or 

by selecting of the Printer Settings/Advanced/Immediate/Calibrate 

from the File menu. Instructions for calibrating the printer for use 

with different media supplies is contained in the CX400 Printer Pro-

gramming Guide found on the CX series Ready-To-Go CD-ROM.