Epson MovieMate 72 Manuale Utente

Caring for Your Epson MovieMate

The Epson MovieMate needs little maintenance. All you need to do on a regular basis is keep 
the lens clean. You also may need to clean the air filter to help prevent overheating.

Warning: Before you clean any part of MovieMate, turn it off and unplug the power cord. Never 
open any part of MovieMate, except as described in this User’s Guide. Dangerous electrical 
voltages in the projector can injure you severely. Do not try to service this product yourself, except 
as specifically explained in this User’s Guide. 

The only parts you should replace are the lamp and air filter. If another part needs replacing, 
contact Epson or a qualified servicer (see page 59).

Follow the instructions in this section to clean the lens and case, clean and replace the air 
filter, replace the lamp, and store or transport MovieMate.

The Epson MovieMate is designed for use virtually anywhere at home. However, MovieMate 
and its accessories should not be exposed to water, smoke, direct heat or sunlight, or left 
outside for long periods of time. As with typical electronic equipment, please avoid exposure 
of MovieMate to moisture, dust, smoke, and other environmental factors which may result in 
damage to internal electronics over time. See the warranty in the Quick Guide for additional 
details on the use of your Epson MovieMate.

Clean the lens whenever you notice dirt or dust on the surface.

■

Use a canister of compressed air to remove dust.

■

To remove dirt or smears, use lens-cleaning paper. If necessary, moisten a soft cloth with 
lens cleaner and gently wipe the lens surface.

Caution: Never rub the lens with abrasive materials.