Sennheiser SK 500 G3 Manuale Utente
22
Adjusting settings via the operating menu
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
“Frequency Preset”
Overview of the frequency banks and channels:
Transmission situation
Sensitivity setting
Loud music/vocals
−30 to −21 dB
Presentations
−21 to 0 dB
Instrument input
Electric guitars with
single coil pickups
single coil pickups
−30 to −24 dB
Electric guitars with
humbucker pickups
humbucker pickups
−45 to −30 dB
Guitars with active elec-
tronics (active pickups,
active EQs, piezo pickups)
tronics (active pickups,
active EQs, piezo pickups)
−45 to −30 dB
When you are in the “
Frequency Preset
” menu item,
the RF signal is deactivated.
Frequency
bank
bank
Channels
Type
“
1
” to “
20
”
up to 32 per
frequency
bank
frequency
bank
System bank:
frequencies are factory-
preset
frequencies are factory-
preset
“
U1
” to “
U6
” up to 32 per
frequency
bank
bank
User bank:
frequencies are freely
selectable
frequencies are freely
selectable
When setting up multi-channel systems, please
observe the following:
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 28).
frequency bank are intermodulation-free (see
page 28).
Bodypack transmitter and receiver of a transmission
link have to be set to the same frequency.
link have to be set to the same frequency.
왘
It is vital to observe the notes on frequency
selection on page 28.
selection on page 28.
Menu
B.Ch:
1. 1
Frequency Preset
B.Ch:
518.200 MHz
Frequency Preset
1
. 1
B.Ch:
Frequency Preset
20.
1
Call up “Frequency
Preset”
Preset”
Select the frequency
bank and confirm
bank and confirm
Select the channel;
store the setting
store the setting
“Stored”
542.625 MHz
SET
SET
SET