Sennheiser SK 500 G3 Manuale Utente
25
Adjusting settings via the operating menu
왘
Set the desired frequency bank.
왘
Set the desired channel.
왘
Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the
MUTE
switch, refer to
Adjusting the transmission power – “RF Power”
Via the “
RF Power
” menu item, you can adjust the transmis-
sion power in two steps.
왘
Press the
SET
button.
The frequency selection appears.
왘
Press the
SET
button.
The frequency selection appears.
왘
Press the
SET
button.
Your settings are stored.
You are back to the operating menu.
You are back to the operating menu.
Mode
Function
“
AF
On/Off
”
When the switch is in the
MUTE
posi-
tion, no audio signal is transmitted.
“
RF On/Off
”
When the switch is in the
MUTE
posi-
tion, the RF signal is deactivated.
“
Disabled
”
The muting function is deactivated.
It is vital to observe the notes on the supplied
frequency information sheet.
frequency information sheet.
Set the frequency
bank and the channel
bank and the channel
Set the frequency;
store the setting
store the setting
Call up “Tune”
(special function)
(special function)
Advanced Menu
Tune
“Stored”
542.625 MHz
SET
SET
SET
542.625 MHz
Tune
B.Ch:
U1
. 1
542
.625 MHz
B.Ch: U1. 1
Tune
Call up “Mute
Mode”
Mode”
Select the desired
setting
setting
Store the setting
Advanced Menu
Mute Mode
Mute Mode
Mute Mode
RF On/Off
AF On/Off
AF On/Off
“Stored”
SET
SET
Call up
“RF Power”
“RF Power”
Select the desired
setting
setting
Store the setting
Advanced Menu
RF Power
Standard
Standard
RF Power
Low
RF Power
“Stored”
SET
SET