Zebra 50-12500-066 Manuale Utente

If desired, program the linear imager scanner to perform various functions, or activate different features. This 
chapter describes imaging preference features and provides programming bar codes for selecting these 
features. 

The linear imager scanner ships with the settings in 

 (also 

 for all host device and miscellaneous defaults). If the 

default values suit requirements, programming is not necessary.

To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in 
non-volatile memory and are preserved even when you power down the linear imager scanner.

If not using a USB cable, select a host type (see each host chapter for specific host information) after the 
power-up beeps sound. This is only necessary upon the first power-up when connecting to a new host.

To return all features to default values, scan the 

. Throughout the programming 

bar code menus, asterisks (

) indicate default values.

Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the 
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and 
bars and/or spaces are not merging.

Feature/Option

Indicates Default

Option Hex Value for 
programming via SSI 
command