Zebra 50-12500-066 Manuale Utente

4 - 6

LI4278 Product Reference Guide

You can set a meaningful name for the linear imager scanner that appears in the application during device 
discovery. The default name is the linear imager scanner name followed by its serial number, e.g., 

. Scanning Set Defaults reverts the linear imager scanner to this name; use custom defaults 

to maintain the user-programmed name through a Set Defaults operation.

To set a new Bluetooth Friendly Name, scan the following bar code, then scan up to 23 characters from 

. If the name contains less than 23 characters, scan 

 after entering the name.

Select a discoverable mode based on the device initiating discovery:

Select General Discoverable Mode when initiating connection from a PC.

Select Limited Discoverable Mode when initiating connection from a mobile device (e.g., Motorola Q), 
and the device does not appear in General Discoverable Mode. Note that it can take longer to discover 
the device in this mode.

The device remains in Limited Discoverable Mode for 30 seconds, and green LEDs flash while in this 
mode. It is then non-discoverable. To re-active Limited Discoverable Mode, press the trigger.

If your application allows you to set a device name, this takes precedence over the Bluetooth Friendly 
Name.