Tascam RS-232C HD-R1 Manuale Utente

In direct play mode, input pins 1 though 16 control 

playback of the currently loaded playlist’s first 16 

tracks, respectively. The exact playback behavior can 

be customized on a per-track basis using the playlist 

track settings found in each playlist entry menu under 

the 

Parallel Control

 submenu. (Please refer 

to the 

Edit Playlist

 section of this document.) 

The following descriptions assume that the input 

signal is active when a button is pressed.
If 

Playback Mode

 is not set to 

Playlist

, 

the first 16 tracks, as determined by the current 

Playback Mode,

 will be triggered in the 

manner determined by the settings found under 

Main 

Menu

 

˘

 

System Settings

 

˘ Playlist

 

Defaults

 

˘ Interruptible

.

NOTE

Binary play mode works exactly like direct play 

mode, except that input pins 1-10 are interpreted as 

a binary number. This enables the triggering of up 

to 1023 different tracks. In the idle state, the signals 

fed into pins 1-10 must be inactive as determined`by 

Main Menu

 

˘

 

System Settings

 

˘

 

Parallel Port ˘ Input Polarity

. If 

any of the signals change state, the HD-R1 will wait 

until all 10 signals have been stable for 250 ms before 

capturing their state to yield a binary number. An 

active signal is interpreted as a binary “1”. This binary 

number will designate the track that is to be played.

NOTE

Program play simply provides a way to control the 

transport keys via the parallel port. It functions with 

any 

Playback Mode

. An active signal on pin 

13 is equivalent to pressing the 

PLAY

 key. An active 

signal on pins 14 or 15 is equivalent to pressing 

SKIP 

 or 

SKIP 

 keys, respectively. An active signal 

on pin 12 will change to the previous folder/playlist 

in alphabetical order. An active signal on pin 16 will 

change to the next folder/playlist in alphabetical order. 

An active signal on pin 17 is the same as pressing 

STOP

.