Tascam RS-232C HD-R1 Manuale Utente

Pagina di 32
TASCAM  HD-R1
2–Controls, Indicators and Connectors
Operation menu keys and Shuttle/Data wheel
Switches, knobs and indicators
The rest of the keys are used for navigating the HD-
R1’s menu interface. 
q
 SHUTTLE/DATA wheel
When the Home Screen is open, the wheel moves 
the playback start point forward and back, or 
it jumps forward and back between tracks and 
markers depending on the Shuttle Mode setting. 
It also navigates up/down through menu items and 
settings.
The main screen of the HD-R1 has two modes: menu 
mode and operation mode. The 
MENU
 key is used to 
toggle between these two modes. 
When in menu mode the following keys are active:
w
 MENU
 
Toggles between menu and operation modes.
This can also be used as the 
SHIFT
 key.
9
 ENTER
 
Selects/activates the currently highlighted menu 
item.
If you press the 
SHIFT
 key at the same time, it 
becomes a shortcut key. (See “4–Key Shortcuts” 
0
 CANCEL
 
Deselects/escapes the current item or screen.
If you press the 
SHIFT
 key at the same time, it 
becomes a shortcut key. (See “4–Key Shortcuts” 
When in Operation Mode, the following keys are 
active.
y
 TIME 
Cycles through the time display modes. (See 
If you press the 
SHIFT
 key at the same time, it 
becomes a shortcut key. (See “4–Key Shortcuts” 
u
 MODE
 
Cycles through the four major playback modes: 
All
Single
Folder
Playlist
If you press the 
SHIFT
 key at the same time, it 
becomes a shortcut key. (See “4–Key Shortcuts” 
This can also be used as the 
CURRENT
 key.
1
 POWER 
Switches the HD-R1’s power on and off.
2
 PHANTOM (+48V) indicator
This red indicator is illuminated when the 
HD-R1 is providing phantom power to the XLR 
microphone inputs. The 
PHANTOM
 power switch is 
located on the rear panel.
3
 INPUT L and INPUT R knobs
Controls the gain for the left and right analog 
inputs.
4
 INPUT L and INPUT R indicators
These indicators show signal presence and 
overload conditions for the left and right analog 
inputs. The indicators will light green when a 
signal at a certain level (-30dBFS) or higher is 
present. However, if the signal level exceeds 
-2dBFS, the indicators will light red.
5
 POWER ON PLAY
When enabled, the HD-R1 will enter play 
immediately after being powered on. It will enter 
the playback mode that was last used with the 
currently installed CF card. If 
Main Menu
 
˘
 
System Settings ˘ Resume
 is 
Off
, playback will begin at the first track in the 
remembered folder or playlist, depending on the 
playback mode. If 
Main Menu
 
˘
 
System 
Settings ˘ Resume
 is 
On
, playback will 
begin wherever the transport was last stopped 
before the power was turned OFF .
6
 USB
USB storage media can be plugged into this USB 
host connector so that files can be copied between 
the USB storage media and the Compact Flash 
media. A USB computer keyboard can also be 
connected here, making it easier to enter text. The 
keyboard may be plugged in or disconnected at 
any time. Storage devices can be inserted at any 
time, but do not remove them while a file I/O 
operation is in progress.
7
 Compact Flash Slot
This slot accepts Type I/II Compact Flash cards
.
8
 LCD
This shows the Home Screen, various menu 
screens and warning messages.
s
 PHONES connector and PHONE knob
This knob controls the volume output through the 
standard ¼-inch headphones jack.