TEAC GF-550 Manuale Utente

Pagina di 96
28
< No button will work while “bUSY” is displayed. Wait about 10 
seconds until “bUSY” disappears from the display.
4
  Press the RECORD button again.
“OFF” and the recording time (minutes/seconds) will be 
displayed.
recording time
5
 Press  the 
.m or ,/ button to set the end 
recording time.
Each time the button is pressed, the display will move up (down) 
by 5 minutes.
< The time set will be memorized and will be displayed the next 
time you will use this function. To change the recording time, 
follow the steps  
1
 to 
5
.
< The recording time can be set up to the maximum recordable 
time of the disc. When the disc has less than 5 minutes of 
recordable time, the recording time will be regulated by the 
remaining time.
Example: CD-RW with a recordable time of “74 minutes”
Press the skip buttons (
.m/,/) to set the time at 
5-minute intervals up to 74 minutes.
10:00
…………
70:00
5:00
74:00
This unit can record from the radio or other equipment connected 
to the unit by setting the end recording time with the REC OFF 
timer.
The REC OFF timer function does not work when the unit records 
from PHONO or TAPE.
1
 Press the PHONO/TAPE/AUX button or the FM/AM button 
to select the source to be recorded.
To record an external source connected to the AUX IN jacks, 
select AUX.
2
  Load a recordable CD-R or CD-RW disc into the unit.
Make sure “NO TOC” and “CD-R” (or “CD-RW)” indicators light on 
the display, or the RECORD button will not work.
<  Before recording, tune in the radio station, set the track number 
assignment, set the recording level and prepare the external 
source connected to the AUX IN jacks.
3
 Press the RECORD button to set the unit to record pause 
mode.
The red indicator on the RECORD button blinks and 
J appears 
on the display.
REC OFF Timer