ATO V.9256K Manuale Utente
76
AT Commands
AT command formats
5.375 x 8.375 ver 2.4.0
Example: +MS=V92,1,0,0
This sets the modulation to be V.92 and the speed
negotiations to use automode. This is the modem default.
negotiations to use automode. This is the modem default.
Example: +MS=V90,0,0,45333
This will limit the maximum speed to 45,333 bps in V.90
mode.
mode.
+MS?
This command displays the current +MS command
configuration.
configuration.
+MS=?
This command displays all supported values for each +MS
command parameter.
command parameter.
<max_rate>
The maximum receive rate. If set to 0,
then the max rate will be determined by
the modulation means selected in the
<carrier> and <automode> settings. Zero
is the default. Valid <max_rate> values
are from 300 to 57333. Maximum receive
rates for each valid <carrier> are as
follows, in bits per second:
then the max rate will be determined by
the modulation means selected in the
<carrier> and <automode> settings. Zero
is the default. Valid <max_rate> values
are from 300 to 57333. Maximum receive
rates for each valid <carrier> are as
follows, in bits per second:
V92
28000—57333 / steps of 1333
V90
28000—57333 / steps of 1333
V34
2400—33600 / steps of 2400
V32B
4800—19200 / steps of 2400
V32
4800—14400 / steps of 2400
V22bis
2400
V22
2200
Bell212A 1200
V23C
V23C
1200
V.21
300
Bell103
300