Agilent Technologies 664xA Manuale Utente

Pagina di 70
Remote Programming     11
 
 Figure 2-1.  Command Message Structure
 
 The basic parts of the message in Figure 2-1 are:
 
 Message Component
 Example
 Headers
 VOLT  LEV  PROT  CURR
 Header Separator
 The colon in VOLT:LEV
 Data
 4.5   4.8
 Data Separator
 The space in VOLT 4. 5 and PROT 4. 8
 Message Units
 VOLT:LEV 4.5     PROT 4.8 CURR?
 Message Unit Separator
 The semicolons in VOLT: LEV 4. 5; and PROT 4. 8;
 Root Specifier
 The colon in PROT 4. 8; : CURR?
 Query Indicator
 The question mark in CURR?
 Message Terminator
 The <NL> (newline) indicator.  Terminators are not part of the SCPI syntax.
Parts of a SCPI Message
 
 Headers
 Headers (which are sometimes known as "keywords") are instructions recognized by the power supply interface.  Headers
may be either in the long form or the short form.
 
 Long Form 
The header is completely spelled out, such as VOLTAGE   STATUS   DELAY.
 Short Form 
The header has only the first three or four letters, such as VOLT   STAT   DEL.
 
 Short form headers are constructed according to the following rules:
 
• 
If the header consists of four or fewer letters, use all the letters. (DFI         DATA)
• 
If the header consists of five or more letters and the fourth letter is not a vowel (a,e,i,o,u), use the first four
letters. (VOLTage         STATus)
• 
If the header consists of five or more letters and the fourth letter is a vowel (a,e,i,o,u), use the first three letters.
(DELay       CLEar)
 
 You must follow the above rules when entering headers.  Creating an arbitrary form, such as QUEST for QUESTIONABLE,
will result in an error.  The SCPI interface is not sensitive to case.  It will recognize any case mixture, such as VOLTAGE,
Voltage, Volt, volt.
 
 
Note 
Shortform headers result in faster program execution.