Technicolor - Thomson dth7500 Manuale Utente

EN

EN

Choose the RGB, S-Video or Video signal, depending on the device
connected to the AV1 Scart socket (usually TV sets). If you don’t know which
type of signal is accepted by your TV set, try each setting to get the best
result.

Note: transmission of DMR images to TV images (with certain TV sets)
If you want to watch one channel while recording programmes on another channel, you
must change the AV1 output connection setting by selecting Video instead of RGB
in the Options menu.

Choose the RGB, S-Video or Video signal, depending on the device
connected to the AV2 Scart socket (usually a satellite receiver). If you don’t
know which type of signal is accepted by your TV set, try each setting to get
the best result.

Note: format of image signals:
RGB: English signal colour code (Red – Green – Blue).
S-Video: S-VHS (Y/C), signals with separate colour components and brightness.
Video: CVBS, composite video signals.

Your DMR has an Eco Standby to reduce its power consumption when on
stand-by. Select Eco standby to enable this function.

Note: the Eco standby function does not allow the display of programming warning
messages on the display panel. Only the record icon will flash.

To select the memory capacity of the Pause Live TV option (45 minutes 
or 1h30).

From the main menu select the Setup line with the 

keys, then confirm with 

.

Select Installation with the 

keys, then confirm with 

.

Select a function with the

keys, confirm with 

, adjust and confirm with the

keys

and 

.

Permits a television to control your DMR and download the same channels
on the same numbers.

Note: this function is positioned by default on On.

Allows your DMR to always be set at the correct time, date and day.

DTH7500_en  4/07/03  16:56  Page 49