Thule 2060 Manuale Utente

907•L5DF8

/501-2060

M A X

LOAD

850 mm / 33 

1

/

2

 inch

860 mm / 34 inch

Before the load carrier can be fitted, tensioning attachments must

first be mounted. The tensioning attachments should always

be left on the vehicle.
1. Open the doors. Remove the plastic cover behind the door.

Unscrew the TORX screw (1 off) using TORX tool 15 and remove

the cover.
2. Unscrew the 6 TORX screws which keep the plastic moulding

in place. Bend the moulding out a bit as shown in the picture.
3. Press the tensioning attachment onto the moulding. The rearmost

attachment must be pressed on and then slid back to the correct

position.
4. Re-fit the moulding and the plastic cover.

Hook the brackets into place in

the tensioning attachments.