SonicWALL TZ 170 Manuale Utente
SonicWALL TZ 170 Wireless Getting Started Guide Page 33
SonicWALL TZ 170 Wireless Security Appliance Regulatory
Statement and Safety Instructions
Note:
Detailed regulatory information can be found in the electronic file,
“SonicWALL_Products_Regulatory_Statement.pdf,” located on the SonicWALL
Resource CD provided with the unit.
Resource CD provided with the unit.
Power Supply Information Models APL14-034
If you need to order a power supply for your SonicWALL TZ 170 Wireless, contact
SonicWALL Technical Support at 408-752-7819 for a replacement.
SonicWALL Technical Support at 408-752-7819 for a replacement.
S
Alert:
This product should only be used with a UL listed power supply marked “Class 2”
or “LPS”, with an output rated 5 VDC, minimum 2.4 A.
Considerations for Mounting the APL14-034
•
Mount in a location away from direct sunlight and sources of heat. A maximum
ambient temperature of 104º F (40º C) is recommended.
ambient temperature of 104º F (40º C) is recommended.
•
Route cables away from power lines, fluorescent lighting fixtures, and sources of
noise such as radios, transmitters, and broadband amplifiers.
noise such as radios, transmitters, and broadband amplifiers.
•
Ensure that no water or excessive moisture can enter the unit.
•
Allow unrestricted airflow around the unit and through the vents on the side of the
unit. A minimum of 1 inch (25.44mm) clearance is recommended.
unit. A minimum of 1 inch (25.44mm) clearance is recommended.
North American Authorized Channels
SonicWALL declares that the APL14-034, when sold in US or Canada is limited to
CH1~CH11 by specified firmware controlled in the USA.
CH1~CH11 by specified firmware controlled in the USA.
Lithium Battery Warning
The Lithium Battery used in the SonicWALL security appliance may not be replaced by
the user. Return the SonicWALL security appliance to a SonicWALL-authorized service
center for replacement with the same or equivalent type recommended by the
manufacturer. If, for any reason, the battery or SonicWALL security appliance must be
disposed of, do so following the battery manufacturer's instructions.
the user. Return the SonicWALL security appliance to a SonicWALL-authorized service
center for replacement with the same or equivalent type recommended by the
manufacturer. If, for any reason, the battery or SonicWALL security appliance must be
disposed of, do so following the battery manufacturer's instructions.
Cable Connections
All Ethernet cables are designed for intra-building connection to other equipment. Do not
connect these ports directly to communication wiring or other wiring that exits the building
where the SonicWALL TZ 170 Wireless is located.
connect these ports directly to communication wiring or other wiring that exits the building
where the SonicWALL TZ 170 Wireless is located.
Regulatory Model/Type
Product Name
APL14-034
SonicWALL TZ 170 Wireless