Adam Equipment mdw-160m Manuale Utente

 

•  Insert the two hexagonal headed screws from the hardware 

pack into the holes in the front of the column and tighten 
slightly. 

 

•  Place both the height rod clamping brackets over the two 

pre-installed hexagonal headed screws and pull it down. 

 

•  Use the included wrench to tighten both the screws. Do not 

over tighten the screws. 

 

 

 

 

 
 

 
 

A. Latch to lock/unlock the  

           

measuring arm 
 
B. The measuring arm 
 
C. The inner height rod

 

 
D. The outer height rod 
 
E. Two height rod clamping brackets 
for fixing the height rods assembly to 
the column. One hexagonal headed 
screw is required for each bracket. 

 
 

 

• Before the person steps onto the scale platform, the 

measuring arm should be lifted to the horizontal position, and 
raised well above the person’s apparent height. 

 

•  The person may now step onto the scale platform.   

 

© Adam Equipment Company 2006 

 

 

6