Sennheiser Set 830-TV Manuale Utente
25
Additional technical information
Changing the operating mode
The transmitter can be set to a different operating mode. This is useful
when the sound of your sound source is very low and the transmitter
therefore does not always switch on automatically.
when the sound of your sound source is very low and the transmitter
therefore does not always switch on automatically.
Particularities of operating mode 2:
In operating mode 2, the transmitter is
not
switched on by the sound
signal from the sound source.
To
switch
the transmitter
on
:
왘
Take the receiver out of the charging compartment.
To
switch
the transmitter
off
:
왘
Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge
its rechargeable battery during operation:
its rechargeable battery during operation:
왘
Press the “speech intelligibility” button
9
for approx. 5 seconds.
The indicator
0
goes off. The charging indi-
cator for the spare rechargeable battery
6
flashes several times:
red:
operating mode 2
green:
operating mode 1 (factory-preset)
If the operating mode was changed success-
fully, the charging indicator for the spare
rechargeable battery
fully, the charging indicator for the spare
rechargeable battery
6
goes off and the
indicator
0
lights up again.
왘
Pull the battery out of the receiver’s battery
compartment
compartment
3
.
왘
Slide the battery into the transmitter’s
charging compartment
charging compartment
5
as far as it will go.
0
9
6
3
5