Garmin eTrex Legend Manuale Utente

12

      Now we will navigate back to the waypoint you 
marked at the beginning of this exercise using the Goto 
function.

  Going To (Goto) the Marked Waypoint:
  1. Press and release the FIND key to display the Find Menu.
  2. Use the CLICK STICK to highlight and select ‘Way-
    points’ from the list of categories.
  3. You will be prompted to select fi nd ‘Nearest’ or fi nd ‘By 
    Name’.  Select ‘Nearest’ and press in on the CLICK STICK 
    to display the Nearest List.  
  4. The waypoint you had previously marked and saved 
    will be on the list. Use the CLICK STICK to highlight the 
    waypoint and then press in to display the Information Page 
    for the waypoint.
  5. Use the CLICK STICK to highlight the ‘Goto’ on-
    screen button and then press it in to activate a Goto.

  Press the PAGE button until the Navigation Page is 
displayed.

  Walk in the direction of the bearing pointer until it 
points to the top of the compass ring. If it points to the 
right, you need to move to the right, if it points left, you 
need to move to the left. When it points straight up, you 
are on course to your destination. The Goto will provide 
you with a direct route back to the waypoint and will not 
necessarily follow the track you created.

  The destination name, distance to the destination, and 
time to reach it are displayed in the window at the top 
of the screen. Two additional data fi elds are provided at 
the bottom of the page and can be programmed to display 
a variety of navigation data such as speed, heading, etc. 
When you begin to approach the waypoint, an “Arriving 
At Destination” message will appear. You can view your 
progress by toggling between the Map and Navigation 
Page.

     To stop navigation, select ‘Stop Navigation’ from either 
the Map or Navigation page’s option menu.

  You have now completed a basic exercise in GPS naviga-

tion. As you learn more about the unit’s operation, you will 
be able to apply more features to your navigation skills.