Symbol Technologies LS 3070 Manuale Utente

 

The RL 470 base station is a charger, host interface, and — significantly — 
receiving station for RF transmission. Therefore, do not install the RL 470 
inaccessibly under a table or buried in a desk drawer. At a minimum, mount 
the RL 470 on a table or desk top. For optimum RF performance, especially in 
difficult environments, mount the RL 470 on  a wall as high as possible. But 
keep in mind the limits of interface cable length and charging accessibility. 

Proper base positioning gives you the best possible range and coverage 
performance from the LS 3070 cordless scanning system.

 

To insert the scanner into the base/charger:

1. First, place the nose to the scanner into the large rectangular receptacle of 

the base/charger. 

2. Then place the scanner handle into the opening of the smaller, latched 

receptacle and press down firmly until the bottom of the handle seats 
snugly into the receptacle and engages the latch. 

 

. 

3. To remove the scanner from the base/charger, grasp the handle of the 

scanner and lift the bottom of the handle out of the latched receptacle, 
thereby freeing the scanner from the base. 

 

.