Symbol Technologies LS 3070 Manuale Utente
3-5
LS 3070 Product Reference Guide: Scanning with the LS 3070
What If ...
Nothing happens when you follow the operating
instructions?
instructions?
You should
•
Check that the power supply is attached to the base/charger.
•
Check for loose cable connections at the base/charger and host device.
•
Check the scanner’s battery pack.
•
Make sure the device is programmed to read the type of bar code you
want to scan.
•
Check the symbol to make sure it is not defaced.
•
Try scanning similar symbols of the same code type.
•
Check that the gas tank is not exhausted.*
•
Make sure the scanner and base/charger have been successfully paired.
•
Be sure you’re within the proper scanning and transmission range.
If you get frequent Transmit Errors (error beeps after decode):
•
Check that you are within scanning transmit range. (See
.)
•
Check that the scanner is successfully paired with the base/charger.
•
Check that the base/charger is powered up and that its cable connections
are secure.
Note:
If after performing these checks the symbol still
does not scan, contact your distributor or call the
Symbol Support Center. See
does not scan, contact your distributor or call the
Symbol Support Center. See
for the telephone number.
* The gas tank limits the amount of time the laser remains on within a given
period to conform to the requirements of specific laser output classifications.
period to conform to the requirements of specific laser output classifications.