Symbol Technologies LS 3070 Manuale Utente

Select the intercharacter delay option matching host device requirements. The 
intercharacter delay gives the host system time to service its receiver and 
perform other tasks between characters. Select from no delay to a 99 msec 
delay between the transmission of each character.

A code ID character identifies the code type of a scanned bar code. This may be 
useful when the scanner is decoding more than one code type. If a prefix is 

selected, the code ID character is sent after the prefix. Code ID characters are: 

A = UPC-A, UPC-E, EAN-13, or EAN-8; B - Code 39; C = Codabar; D = Code 
128; F = Interleaved 2 of 5; G = Discrete 2 of 5.

Enabling this parameter, with the Transmit Code ID Character parameter 
enabled allows you to send the AIM code identifer in lieu of the Symbol 
identifiers listed above. The identifier will be sent as a three character prefix, in 
accordance with AIM specifications for symbology identifiers. See AIM’s 
Guidelines on Symbology Identifiers

 for full details.

When enabled, all data is sent except for unknown characters, and no error 
beeps are sounded. Unknown characters are those characters the selected 
terminal does not recognize.

When disabled, all data containing one or more unknown characters is 
discarded, and error beeps are sounded.

Selects the appropriate clock edge values so that a host terminal with non-

standard OCIA format can recognize the clock signal phase synchronized with 

data.