SMART Technologies board d600 Manuale Utente

CHAPTER 2 – INSTALLING AND SECURING YOUR SMART BOARD 
INTERACTIVE WHITEBOARD

If you’re installing a SMART Board 
685/D685 or 690/D690 interactive whiteboard, 
space your wall-mounting brackets’ innermost 
screw holes 4" (10.2 cm) or 6" (15.3 cm) apart 
respectively, and then mark the location of the 
10 mounting holes on the wall, as illustrated.

WARNING
Use two wall-mounting brackets to install 
your SMART Board 685/D685 or 
690/D690 interactive whiteboard. 
Using only one bracket could result in 
personal injury or product damage.

3. Use the Phillips No. 2 screwdriver to secure an 

included self-tapping wall anchor at each mark. 

CAUTION
Do not use a hammer to secure these 
anchors. 

If you’re unable to screw an anchor flush to the 
wall, you might have encountered a stud. If this 
is the case, you don’t need to use an anchor in 
this location. The stud will provide adequate 
support for the screw that secures the bracket 
to the wall.

NOTES
–

For a concrete wall, drill holes at the marks, and then insert concrete 
anchors (not included) into the holes.

–

If necessary, stand on a stepladder so that you can secure these wall 
anchors flush to the wall.

4. Using the screwdriver, secure the wall-mount 

bracket to the self-tapping wall anchors with the 
included screws.

5. With the help of another person, temporarily 

hang your interactive whiteboard on the center 
of its wall-mounting bracket.

685/D685: 4" (10.2 cm)
690/D690: 6" (15.3 cm)