Sanyo clt-d6623 Manuale Utente

30

If you have more than one handset, you can enjoy an intercom call between 

handsets. You can also establish a conference call (between two handsets and 

outside).    
   

 

 

 

 

 

 

 

 

The handset and base unit are factory pre-registered with each other. Therefore, 

the unit should be in full working order out of the box.  When you purchase an 

additional handset, you have to register it to the base unit in order to make and 

answer calls.
You can register up to 3 more handsets to make and answer calls via the same 

base unit. Handsets are numbered 1 to 4.
If your handset is not registered to the base "NOT REGISTERED" will display on 

the handset. The handset must first be registered to the base to be used.
To.register.a.new.handset:
1.  Touch 

 and select the SECURITY SET menu and then the    

 

  REGISTRATION submenu.
2.  Use 

.or.

.to select the base number you wish to register to. 

3.  Touch 

.to confirm.

4. 

Enter the 4 digit PIN code (default 0000) and touch 

, you will see the   

  message: 'REGISTERING'.

5. Press and hold the PAGE key on the base until the Charge/In use LED    

  flashes.  
6.  ‘REGISTRATION ACCEPTED’ indicates that handset is registered.  

 

  ‘RETRY?’ indicates that registration has failed. Touch 

 to retry or 

 to  

  quit.
To.select.a.base.unit.on.your.handset:
Your telephone supports up to 4 base units. After you register 1 handset to 4 

base units, bases are numbered 1 to 4, you may select which one to use.   
1.  Touch 

 and select the SECURITY SET menu and then the SELECT    

  BASE submenu.
2.  Use 

 or 

 to select the base number or ‘AUTO’ (automatically selects  

  the nearest base).
3.  Touch 

.to confirm.

4.  ‘ACCEPTED’ indicates that base has been selected. ‘RETRY?’ indicates   
  that selection has failed. Touch 

 to retry or 

 to quit.