Trimble Outdoors aggps 332 Manuale Utente
5 Configuring the Receiver
4 8 AgGPS 332 GPS Receiver User Guide
3.
Set the EZ Sat: Omni* field to the area you are operating in. For
example, if you are working in California, select N. America West.
example, if you are working in California, select N. America West.
4.
Press
4
then
5
to complete the procedure.
5.
Obtain an OmniSTAR licence from OmniSTAR. All licenses are
activated over the air. Contact OmniSTAR on 1-888-883-8476
(USA or Canada) and provide the following details:
activated over the air. Contact OmniSTAR on 1-888-883-8476
(USA or Canada) and provide the following details:
–
your billing information
–
serial number
–
satellite beam name
OmniSTAR will activate the receiver. Activation can take 5 to
30 minutes.
30 minutes.
50.1
WAAS/EGNOS
WAAS is a free satellite-based DGPS service that is available only in
North America; EGNOS is a free satellite-based DGPS service that is
available only in Europe.
North America; EGNOS is a free satellite-based DGPS service that is
available only in Europe.
To use the WAAS/EGNOS DGPS signal, you must first configure the
receiver.
receiver.
1.
From the Home screen, select Configuration / DGPS Config.
2.
Set the Source Select field to WAAS.
3.
Press
4
then
5
to complete the procedure.