Acura 2011 mdx Manuale Utente
126
Navigation System
System Setup
Three-way Rearview Modes
The rearview image can be easily
switched between Wide, Normal, and
Top view modes by pushing in on the
switched between Wide, Normal, and
Top view modes by pushing in on the
Interface Dial
.
When you select the Wide or Normal
view mode and turn the ignition off, the
last mode will be selected next time the
camera is used.
view mode and turn the ignition off, the
last mode will be selected next time the
camera is used.
Tip:
Only use Top view when objects are
close (less than one meter) to your
vehicle.
Only use Top view when objects are
close (less than one meter) to your
vehicle.
NOTE:
If the last mode is Top view, the Normal
view mode will be selected after boot up.
If the last mode is Top view, the Normal
view mode will be selected after boot up.
Multi-view Rear Camera
Brightness Adjustment
Brightness Adjustment
When in reverse, the navigation buttons
are locked out, except the rotating
portion of the
are locked out, except the rotating
portion of the
Interface Dial knob
.
Rotate the
Interface Dial knob
clockwise to make the camera image
brighter, and counterclockwise to
darken the image.
brighter, and counterclockwise to
darken the image.
This brightness adjustment is
independent of the screen brightness
adjustment in SETUP.
independent of the screen brightness
adjustment in SETUP.
NOTE:
• The camera brightness cannot be
• The camera brightness cannot be
adjusted by voice control.
• Slight delays can occur when
switching to the camera image
(especially when first starting your
vehicle), or switching back to the
(especially when first starting your
vehicle), or switching back to the
map/menu
screen. This is normal.
Wide view
Normal view
Top view
2011 MDX