Epson 4490 Manuale Utente

Epson Perfection 4490 Photo

4 - Epson Perfection 4490 Photo

4/05

1. Open the scanner cover.

Make sure the document mat is installed inside the cover. If 
it is not installed, see “Replacing the Document Mat” on 
page 7 for instructions.

2. Place your document or photo on the document table, face 

down on the glass. Make sure the top of the document or 
photo is against the upper right corner of the document 
table.

3. If you are scanning multiple photos at once, position each 

photo at least 20 mm (0.8 inches) apart from the others. 

Note: If you are scanning large or thick documents, you can 
remove the scanner cover.

4. Close the scanner cover gently so that your original does not 

move.

Note: Always keep the document table clean. 

Do not leave photos on the document table for an extended 
period of time as they may stick to the glass.

To scan film strips or slides, you need to remove the document 
mat from the scanner cover. This uncovers the transparency 
unit so your scanner can use it to scan your film or slides.

1. Make sure the cover cable is connected to the scanner’s 

OPTION

 port.

Note: 
Before connecting or disconnecting the cover cable, turn off the 
scanner using its power switch.