Alliance Laundry Systems d355ie1b Manuale Utente
504524
9
Before You Start . . .
Tools
For most installations, the basic tools you will need are:
Exhaust
Use rigid metal duct and exhaust the dryer to the outside
by the shortest route possible.
by the shortest route possible.
NOTE: For more detailed information, refer to
Section on Dryer Exhaust Requirements.
Section on Dryer Exhaust Requirements.
Electrical
• ELECTRIC DRYER Dryer needs a 3 or 4 wire 120/
240 or 120/208 Volt, 60 Hertz, AC single Phase
electrical supply.
electrical supply.
• GAS DRYER
Dryer needs a 120 Volt,
60 Hertz, polarized 3-slot effectively grounded
receptacle.
60 Hertz, polarized 3-slot effectively grounded
receptacle.
NOTE: For more detailed information, refer to
Section on Electrical Requirements.
Section on Electrical Requirements.
Gas
Dryer is equipped for Natural Gas with a 3/8" NPT gas
supply connection. For more detailed information, refer
to Section on Gas Requirements.
supply connection. For more detailed information, refer
to Section on Gas Requirements.
Location
Place the dryer on a solid floor with an adequate air
supply. For more detailed information, refer to Section on
Location Requirements.
supply. For more detailed information, refer to Section on
Location Requirements.
D074IE1F
DUCT TAPE
TEFLON TAPE
WRENCH
LEVEL
SCREWDRIVERS
D354IE0A