Hitachi VM-H835LA Manuale Utente

Simple Programmable Edit (Edit remote control is optional accessory) 

 

57

 

1. Turn the VCR on. 
2. Aim the remote control at the infrared receiver on the VCR and press the VCR SET 
button on the remote control and hold it, then press the button corresponding to the 
VCR's maker code. For example, if you have a RCA VCR, press the VCR SET button 
and hold it, then press the DISPLAY button. To check whether the remote control code 
matches that of your VCR or not, point the remote control at the infrared receiver on the 
VCR and press the VCR SET button and hold it. If the remote control code has been 
set, the VCR channel is counted up automatically. 

Note: Your VCR should have an infrared remote control. 
Note: If the channel on the VCR does not change with the above operation, you need to 
switch the remote control code of your VCR. Refer to the VCR's instruction manual. If the 
channel still does not change after you have changed the VCR's remote control code, the 
edit remote control cannot operate your VCR. 

VCR Brands   

Press VCR SET and This Button 

Hitachi    REVERSE 

Sony 

   PROGRAM 

Panasonic 

  FORWARD 

Toshiba 

  IN 

Mitsubishi 

  COPY 

START 

Sanyo 

   OUT 

Sharp 

   

 

NEC 

     

JVC 

   

 

Akai 

   A/V 

DUB