Scag Power Equipment STT-31BSG Manuale Utente
Section 6
25
2002 CCB
MOUNTING
HARDWARE
MOUNTING
HARDWARE
Figure 6-8. Custom Cut Baffle
3. Move the Custom-Cut Baffle to desired position.
(See Figures 6.9 through 6.11 for position).
4. Reinstall the mounting hardware as shown. (See
Figures 6.10 though 6.11). Torque hardware to
39ft.lbs.
39ft.lbs.
Figure 6-9. 3" Custom Cut Baffle Position
2002 CCB - 3" Setting
2002 CCB - 3-1/2" Setting
CARRIAGE BOLT
BOTTOM SET OF HOLES
FOR 3-1/2" SETTING
FLATWASHER
ELASTIC STOP
NUT
2002 CCB - 4" Setting
CARRIAGE BOLT
FLATWASHER
ELASTIC STOP
NUT
TOP SET OF HOLES
FOR 4" SETTING
Figure 6-11. 4" Custom Cut Baffle Position
To adjust the Custom-Cut Baffle height:
1. Place the cutter deck in the transport position.
2. Remove the hardware securing the Custom-Cut
Baffle to the cutter deck. (See Figure 6.8).
-NOTE-
Hardware location used in the illustrations are
for reference only. Location of hardware may
vary depending on cutter deck size.
for reference only. Location of hardware may
vary depending on cutter deck size.
Figure 6-10. 3-1/2" Custom Cut Baffle Position