Petsafe PIF-300 Manuale Utente

 

www.petsafe.net 7

The Transmitter is located at the exact center of the Pet Area. Place the Transmitter:

• At least 2 feet above the floor located on the ground floor of your home.

• In a dry, well ventilated, protected area.

• In an area where temperatures do not fall below freezing (e.g., garage, shed, closet).

• On a non-metal table or mount on a wall (1A). A mounting template is included on the back of 

this guide.

• At least 3 feet from large metal objects, as these items may reduce the size and shape of your 

Pet Area (1B).

To maximize your Pet Area, make 

sure the Boundary Switch is on 

“High” and the Boundary Control 

Dial is set to “8” (1C). Plug Power 

Adapter into Power Jack and 

standard 120-volt outlet. Turn the 

Transmitter on.

Your Receiver Collar comes with short Contact Points. Long Contact Points for 

pets with long or thick hair are available through our Customer Care Center at 

1-800-732-2677. Tighten the Contact Points using the Test Light Tool (2A) one-half 

turn beyond finger tight. Check the tightness weekly.

Note: Do not install the battery while the Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe

®

 battery (RFA-67). This unique 

battery is designed to make battery replacement easier and increase water 

protection. 
To insert the battery, align the symbols on the battery (arrow) and Receiver 

Collar (triangle) (2B). Use the edge of the Test Light Tool (2B) to turn the 

battery clockwise until the arrow lines up with the lock symbol on the housing. 
To remove the battery, turn the battery counter-clockwise using the edge of 

the Test Light Tool (2C). DO NOT attempt to cut into or pry open the battery. 

Be sure to discard the used battery properly.
A replacement PetSafe

®

 battery (RFA-67) can be found at many retailers. 

Contact the Customer Care Center at 1-800-732-2677 or visit our web site at 

www.petsafe.net to locate a retailer near you.

1

2