Addtron Technology KE1021A Manuale Utente

Pagina di 15
 
contact’s phone number. Press SET/OK to add. 
7.10.3Modify or delete SpeedDial number 
Press M1---M8 speed dial to be modified or deleted. Press SET/OK to delete the currently stored speed dial. 
Press SET/OK if you wish to enter new details for this speed dial. Otherwise, if you wish to leave the 
SpeedDial empty just press ESC. Please press SET/OK to save the changes when prompted to. 
 
Note: Speed dials can not be modified. You must delete the speed dial and then enter a replacement. 
 
8. Frequent Problems and Answer 
Problem Possible 
Cause 
Solution 
Your internet connection bandwidth 
is less than 30Kbps 
Poor Voice Quality 
Unstable network connection:   
Network delay > 500ms or network 
trembling > 100ms or network 
packet loss > 10% 
Your internet connection may not be 
performing correctly. Please contact your 
Internet Service Provider or Network 
administrator. 
Phone’s connection to the internet is 
obstructed by a firewall. 
Your network has a proxy server 
which is blocking the phone’s 
connection to the internet. 
Please contact the supplier of your Mamakall 
Netphone for advice on how to configure 
your firewall or proxy server. 
Your phone is configured with 
incorrect account details. 
Please contact the supplier of your Mamakall 
Netphone for advice on how to reconfigure 
your account details. 
Phone continues to 
display either ‘Please 
Wait’ or ‘Wait Logon’ 
 
Your phone is configured with an 
incorrect server address. 
Please contact the supplier of your Mamakall 
Netphone to confirm your phone has the 
correct server details. 
 
9. Others 
9.1 System Characteristics 
z  Program memory—1024KB Flash memory   
z  Ethernet interface—One or two RJ45 connector compatible with IEEE 802.3 10 Base-T   
z  Keypad—besides the standard keys 0-9,*,#, there are another 12 function keys for operation and 
setting of Netphone-KE1000 
z  Status indicator—LED to indicate working status and LCD light 
z  Hand free function—full duplex speakerphone, dial-tone, speaker and loudspeaker volume can be 
digitally adjusted independently 
z  AC/DC adapter— input 100~120V (USA, Japan etc.) or 220~240V (China, Europe etc.) or 
100~240V,47-63Hz   
z  Log on Soft-switch      
z  Automatic find Soft-switch 
z  Support DHCP: Automatically obtain local IP, subnet mask, router IP 
z  Support PPPoE 
z  Voice active detection   
z  Comfortable noise generation