Manualsbrain.com
  1. Manuali
  2. Marche
  3. Elo TouchSystems
  4. JH 10T08
  5. Manuale Utente

Elo TouchSystems JH 10T08 Manuale Utente

Scarica
Pagina di 54
52
IND100077-31
INB100014-1 (Rev 19)
Appendix
Notes
Important BIOS Reset / No picture information
Please note that when performing a “Load Optimized Defaults” or “Load Fail-Safe 
Defaults”
 command in the BIOS menu, or if the internal ETX processor module was replaced, 
the picture on the TFT display will be black and the sync will be lost upon restart. No picture will be 
present on the MMC unit!
However, by using the standard RGB OUT DSUB connector connected to an external TFT Display 
or CRT Monitor, you will get a cloned picture from the MMC unit. Now you can correctly setup the 
display properties in the BIOS, which will re-enable the picture to display correctly on the MMC unit
again. Please follow the procedure below for your MMC unit.
If you have no external display or monitor available, you can use the “blind man” routine:
1: Power on the MMC unit, while pressing <DEL> on the keyboard to enter BIOS setup.
2: Press the <DOWN ARROW> key 2 times, then press <ENTER>
3: Press the <DOWN ARROW> key 17 times, then press <ENTER>
4: Press the <DOWN ARROW> key 5 times (15 inch), 3 times (19/20 inch) or 6 times (23 inch)
    followed by pressing <ENTER>
5: Press <F10> on the keyboard, and press <ENTER>. The BIOS settings will be saved, and the
    unit will reset and boot up correctly with picture on the MMC Unit again.
BIOS Setup Menu Reference:
All versions of 15 Inch - JH 15T05MMC-xx (Pentium M)
- Choose “Advanced Chipset Features”
- Choose “Panel Number”
- Choose “1024x768  24bit SC”
All versions of 19 Inch - JH 19T02MMC-xx (Pentium M)
- Choose “Advanced Chipset Features”
- Choose “Panel Number”
- Choose “1280x1024  24bit SC”
All versions of 20 Inch - JH 20T05MMC-xx (Pentium M)
- Choose “Advanced Chipset Features”
- Choose “Panel Number”
- Choose “1280x1024  24bit SC”
All versions of 23 Inch - JH 23T02MMC-xx (Pentium M)
- Choose “Advanced Chipset Features”
- Choose “Panel Number”
- Choose “1600x1200  24bit SC”
When done, please refer to the BIOS manual if you need to change other options (available on 
separate/attached CD for your specific product).