Epson PowerLite 1730W Manuale Utente

Pagina di 107
28
Using the Remote Control
Using the Remote Control
Follow these tips for using the remote control: 
Point the remote control at the front of the projector or at the 
screen.
Stand within 20 feet of the projector. 
Avoid using the remote under bright fluorescent lamps or in 
direct sunlight, or the projector may not respond properly.
Replacing the Batteries
Replace the batteries as described below: 
1. Turn the remote control over. 
2. Press the tab on the battery cover 
to open it.
3. Install two AA batteries, 
inserting the 
+
 and 
 ends 
as shown.
4. Close the cover, pressing it down 
until it snaps into place.
note
If a button is pressed longer 
than 30 seconds, the remote 
control stops operating to 
conserve power. When you 
release the button, normal 
operation resumes. 
caution
When replacing batteries, 
take the following 
precautions:
Replace the batteries as 
soon as they run out. If the 
batteries leak, wipe away 
battery fluid with a soft 
cloth. If fluid gets on your 
hands, wash immediately.
Do not expose batteries to 
heat or flame.
Dispose of used batteries 
according to local 
regulations.
Remove the batteries if 
you won’t be using the 
projector for a long period of 
time.