Epson PowerLite 1730W Manuale Utente

2. Press the 

ID

 button on the remote control. You see a message on 

the screen, showing the projector’s ID: 

If the message says the remote control is “On,” then you can use 
the remote control to operate that projector. If it says “Off,” then 
you have to change the ID of the remote control before operation 
is possible, as described in the next section. 

The remote control’s default ID is zero. This lets it operate any 
projector. To set it to operate only those projectors with a specific ID, 
follow these steps:

1. Press and hold the 

ID

 button on the remote control.

2. While holding the 

ID

 button, press the numbered button on the 

remote control (1 through 9) that corresponds to the ID of the 
projector(s) you want to operate. Selecting zero lets you control all 
projectors.