Epson PowerLite 1730W Manuale Utente
Connecting to Computers and Other Equipment
45
Connecting a Component Video Source
You will need a component-to-VGA cable, or a component video
cable and adapter, for this connection. You can order the
component-to-VGA cable (ELPKC19) from Epson; see page 12 for
more information.
cable and adapter, for this connection. You can order the
component-to-VGA cable (ELPKC19) from Epson; see page 12 for
more information.
1. Locate a component-to-VGA video cable or adapter.
2. Connect the cable to your player and the blue
Computer
(Component Video)
connector on the projector. If you’re using
an adapter, connect it to a standard component video cable as
shown below.
shown below.
3. If you want to play sound through the projector, see page 47 for
instructions on connecting audio cables.
4. If you don’t need to make any other connections, see page 15 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
Once the projector is turned on, select the image source: press the
Search
button on the remote control or the
Source Search
button on the projector’s control panel.
note
Make sure the Input Signal
setting in the Signal menu is
set to Auto or Component
Video (see page 55).
setting in the Signal menu is
set to Auto or Component
Video (see page 55).
Component-to-VGA cable
(ELPKC19)
(ELPKC19)
Component-to-
VGA adapter
VGA adapter
Component
video cable
video cable