Epson PowerLite 1730W Manuale Utente

To prevent unauthorized use, you can assign the projector a password. 
If you do, a screen will appear requesting the password whenever the 
projector is plugged in and turned on. If an incorrect password is 
entered three times in succession, the projector’s operation is locked 
and the power cord must be disconnected and reinserted to redisplay 
the password screen. If an incorrect password is entered thirty times in 
succession, the user must contact Epson to unlock the projector. 

The default setting for the Password Protect function is 

Off

. Follow 

these steps to turn password protection on:

1. Press the 

Freeze

 button on the remote control for about five 

seconds.

You see this screen:

2. Use the 

pointer button to set 

Power On Protect

 to 

On

. 

Then press 

Enter

.

3. Press 

Esc.

4. Select 

Password

 and press 

Enter

.

5. When you see a message asking if you want to change the 

password, select 

Yes

 and press 

Enter

.

6. Hold down the 

Num

 button on the remote control and use the 

numeric keypad to enter a four digit password. (The default 
setting is 0000.) 

7. When you see a confirmation message, reenter the password. 

Then press the 

Menu

 button to exit the screen.