Epson PowerLite 1730W Manuale Utente

Your projector includes an air filter to ensure the best performance. If 
dust collects on the air filter (on the side of the projector) or vent (on 
the front of the projector), clean them as described below. Dust clogs 
prevent proper ventilation and can cause overheating and damage the 
projector. 

Follow these steps:

1. Turn off the projector. Wait for the P

Power

 light to stop 

flashing, then unplug the power cord.

2. To clean the intake vent and filter, use a small vacuum cleaner 

designed for computers and other office equipment. If you don’t 
have one, gently clean the vent with a soft brush (such as an 
artist’s paintbrush).

You can remove the air filter to clean both sides.

3. If the dirt is difficult to remove or the filter is broken, replace the 

filter as described on page 72. Contact your dealer or call Epson at 
800-GO-EPSON (800-463-7766) to obtain a new filter. 

To order replacement air 
filters, request part number 
V13H134A19. See page 12 
for ordering information.

Exhaust 
vent

Air filter