Epson CX11N Manuale Utente

Epson AcuLaser CX11N/CX11NF

6

 -

 Epson AcuLaser CX11N/CX11NF

8/05

The optional Paper Cassette Unit can hold the following types 
and sizes of paper. 

You can place originals on either the document table or the 
Auto Document Feeder (CX11NF only), depending on the 
type of the original. 

Note: 
If you place originals on both the Auto Document Feeder and the 
document table, only the documents in the Auto Document Feeder 
are scanned.

Before scanning or copying, make sure the transportation lock 
on the left side of the document table is set to the 

 unlock 

position. Always keep the document table clean. 

1. Open the document cover and place your original face-

down on the glass as shown, in the upper left corner. Move 
your original about 0.06 in. (1.5 mm) away from the top 
and left edges so all of it will be scanned. 

If you plan to scan multiple photographs, position each one 
at least 0.8 in. apart from the others.

Note: 
The area with a width of maximum 0.06 in. from the horizontal 
edge and 0.06 in. from the vertical edge is not scanned.

Caution: 
Do not place heavy objects on the document table or press the 
glass surface with too much force.

2. Close the document cover gently so that your original does 

not move.

Note: 
Do not leave photographs on the document table for an extended 
period of time as they may stick to the glass.

When you scan large or thick originals, you can remove the 
document cover. Just open it and pull it straight up.

If you need to press the document flat while you copy or scan 
it, do not press too hard and be careful not to move it.

Caution: 
Do not use excessive force on the document cover, and do not twist 
it diagonally. You may damage the document cover.

When you are done, replace the document cover by inserting 
the tabs back into the slots.

The ADF can hold the following types and sizes of paper. 

1. Slide the edge guides all the way outward.

2. Arrange your originals so the page you want scanned or 

copied first is on the top of the stack.

Note: 
Pages are fed from the top and ejected face-down.

3. Insert up to 50 originals short edge first and face-up in the 

Auto Document Feeder until it meets resistance. Slide the 
edge guides inward against the edges of your originals.

Plain paper 

A4, Letter (LT)

Up to 500 sheets in a cassette
Total stack thickness: 2.2 in.

Plain paper, Recycled 
paper 

B5, A4, Letter (LT), 
Legal (LGL)

Up to 50 sheets (Total 
stack thickness: 0.4 in.)