Adam Equipment mdw-300l Manuale Utente
© Adam Equipment Company 2012
Page
5
4.0 SETTING UP THE SCALE
•
Take the scale out of the box.
1. Locate the 4 screws (2)
2. Place the cable (4) through the pillar
(3).
3. Insert the 4 screws (2) through the
holes on the pillar bracket and secure
the bracket to the indicator (1),
4. Make sure the screws are securely
tightened.
2. Place the cable (4) through the pillar
(3).
3. Insert the 4 screws (2) through the
holes on the pillar bracket and secure
the bracket to the indicator (1),
4. Make sure the screws are securely
tightened.
5. Place the cable (4) into the tube
support (6) on the scale base.
6. Insert the pillar (3) into the tube
support (6).
7. Rotate the pillar to position the
indicator (1) in the direction desired,
and then secure using the 2 screws
(5) into the fixing tube (6).
support (6) on the scale base.
6. Insert the pillar (3) into the tube
support (6).
7. Rotate the pillar to position the
indicator (1) in the direction desired,
and then secure using the 2 screws
(5) into the fixing tube (6).