Ericsson 230i Manuale Utente

When you make a phone call your telephone number is normally sent to the 
person you are calling. With the 

 (Calling Line Identification Restriction) 

menu option you can prevent this information from being sent. 

With the 

(Connected Line identification Restriction) menu option you 

can prevent a calling party seeing your phone number when you answer the 
call.

The base station rings when an external call is received. You can adjust the 
ring volume via the menu.

The base station is pre-set so that all handsets ring at the same time. However, 
you can also personalise the order in which the handsets ring.

Setting the ringing order. Using a handset, you can program the order in 
which the handsets ring. You are given the following options:

 means only handset 1.

 means first handset 1, then all handsets.

 means first handset 1, then 2, then 3, etc.

 means all handsets at the same time (default).

As soon as you assign a telephone number (MSN) to a handset, you may want 
to change the ringing order to 

or

. 

in this case stands for all 

handsets with the same telephone number.

Setting the ring delay. You can also set the number of rings after which the 
next handset starts to ring.

The auto divert feature means you can be reachable by phone even when you 
are out of range of the base station. When you are in range, calls are routed to 
your handset. If you are out of range for any period of time, calls can be 
routed to a GSM phone or a voice mailbox, for instance.

If this feature is on, the base station scans for your handset at regular intervals. 
If it cannot locate the handset, it calls a certain telephone network service to 
activate a diverted telephone number. As soon as the handset is located again, 
the same service is called to deactivate the diverted telephone number. Ask 
your dealer or retailer for more information on the call diversion service.

Auto divert can only be set for one handset. If a diverted telephone number is 
activated, no calls may be received by the base station until the priority phone 
handset is located again.

Setting the priority phone for auto divert. To be able to set a priority phone 
for auto divert, a MSN (see“Multiple Subscriber Numbers (MSN)” on page 20