Pioneer vsx-d512 Manuale Utente

• Default setting: 

Here you tell the receiver what component you
have hooked up to the optical input jack.

’ or ‘ to select the optical digital

input  (DVD, TV, CD, CD-R, VCR, or OFF).
After you assign a component to the digital
jack, whenever you select that component, for
example a DVD player, the receiver automati-
cally changes to the digital input setting and
DIGITAL shows in the display.

• Default setting: 

For best surround sound playback, you should
set the relative channel levels from the main
listening position. You can set seperate levels
for each surround mode.

tone.
The test tone is output in the following order
(depending on the speaker setting):

If you don’t hear a test tone from one of your
speakers, please refer to Speaker setting on
page 32 to make sure you have correctly
specified your speaker setup.

levels in turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level range
is ± 10 dB.

The speaker volume can be adjusted without
outputting the test tone by pressing 

SELECT and then using LEVEL +/–.

• Test tone is only output in Standard
modes.

• Since the subwoofer transmits an ultra-low
frequency its sound may seem quieter than it
actually is.

XRE3068A.En.31.35

03.2.3, 11:11 AM

35